Split Head Hammer – No. 395

Split Head Hammers

Split Head Hammer – No. 395

Ideal for use with arch punches, grommet dies and wherever a cushioned blow is desired. No trouble to replace faces. Just loosen the safety nut, remove the worn face,insert replacement and tighten. Long wearing.

Hammer it is available with rawhide, nylon urethane and copper. Rawhide faces supplied if none specified.

Osborne NoDescriptionWeight pair
(lbs) (oz)
Length of
head (in)
Diameter
of face (in)
UPC No.
395-1RSz. 1 - Rawhide 1 9 3 5/81 1/4 11090
395-2RSz. 2 - Rawhide 2 -4 1/41 1/211094
395-3RSz. 3 - Rawhide 2 15 4 7/81 3/4 11098
395-1NSz. 1 - Nylon1 8 3 5/81 1/411092
395-2NSz. 2 - Nylon2 - 4 1/41 1/211096
395-3NSz. 3 - Nylon2 154 7/81 3/411100
395-1USz. 1 - Urethane 1 8 3 5/81 1/411091
395-2USz. 2 - Urethane 2 - 4 1/41 1/211095
395-3USz. 3 - Urethane 2 15 4 7/81 3/411099
395-1CSz. 1 - Copper 2 -3 5/83 5/811093
395-2CSz. 2 - Copper 2 15 4 1/41 1/211097
395-3CSz. 3 - Copper 4 4 4 7/81 3/411101