Revolving Punch –
Osborne No. 155
Six tube punch made with tubes 1 (3/32″),2 (7/64″),3 (1/8″), 4 (5/32″), 5 (11/64″),6 (3/16″) or 0 (5/64″), 1 (3/32″), 2 (7/64″), 3(1/8″),5 (11/64″) & 7 (13/64″).
This punch is known as the best Revolving Punch made. The frame is made of forged steel, highly polished. Cutting tubes are turned from special carbon tool steel and threaded to allow easy replacement. These tubes are individually hardened. The reach or distance from the cutting tube to the back of jaw is 1 1/4″. Size 1-6 will be provided unless specified otherwise.
This punch is known as the best Revolving Punch made. The frame is made of forged steel, highly polished. Cutting tubes are turned from special carbon tool steel and threaded to allow easy replacement. These tubes are individually hardened. The reach or distance from the cutting tube to the back of jaw is 1 1/4″. Size 1-6 will be provided unless specified otherwise.
Osborne No. | Description | UPC No |
---|---|---|
155 1-6 | Revolving Punch | 52010 |
155 0-7 | Revolving Punch | 52012 |
155-A | Extra Anvil | 52052 |
155-HS | Extra Handle Spring | 02070 |
155-SP | Extra Side Spring | 02072 |
155T-(size) | Extra Tubes | See Below |
155 0-7 | Set of Replacement Tubes | 02044 |
155 1-6 | Set of Replacement Tubes | 02046 |
Note: Numbers 155,153 and 223 tubes are not interchangeable. No 155 punch takes tubes up to size 6 and 7 as indicated on the cylinder of the punch. Punch tubes measure 3/4″ overall.