Transfer Punch – Osborne
No. 358MM
Properly hardened. Available In 25 sizes from 1mm up to 13mm in 0,5mm increments. Overall length of each one it is 5″ or 128mm.
Used for accurate transferring of threaded, drilled o tapped holes.
Available in sizes listed below.
Used for accurate transferring of threaded, drilled o tapped holes.
Available in sizes listed below.
| Point diameter (in) | Weight each (oz) | UPC No. |
|---|---|---|
| 1 | 0.1 | 52482 |
| 1.5 | 0.2 | 52466 |
| 2 | 0.2 | 52486 |
| 2.5 | 0.3 | 52484 |
| 3 | 0.4 | 52490 |
| 3.5 | 0.4 | 52488 |
| 4 | 0.5 | 52494 |
| 4.5 | 0.5 | 52492 |
| 5 | 0.5 | 52498 |
| 5.5 | 0.8 | 52496 |
| 6 | 0.8 | 52502 |
| 6.5 | 1.1 | 52500 |
| 7 | 1.2 | 52506 |
| 7.5 | 1.3 | 52504 |
| 8 | 1.7 | 52510 |
| 8.5 | 1.8 | 52508 |
| 9 | 2.0 | 52514 |
| 9.5 | 2.2 | 52512 |
| 10 | 2.4 | 52470 |
| 10.5 | 2.5 | 52468 |
| 11 | 2.7 | 52474 |
| 11.5 | 2.9 | 52472 |
| 12 | 3.1 | 52478 |
| 12.5 | 3.3 | 52476 |
| 13 | 3.6 | 52480 |